Light Switch

Light Switch

Having electric work at home will surely be a costly matter. If you have a lot of money well it's not a big problem. You can hire an electrician to do the job for you. But what if you are saving money for some important matters? How are you able to do things yourself? Here are five electrical tasks a homeowner can do himself: changing light bulbs, wiring a light switch, Installing switch outlets, wiring a receptacle, and wiring a door bell.

Changing light bulbs is as easy as it looks. First you should turn off the switch to avoid electric grounds. Then, put the new light bulb in replace of the old one. Be sure that you put it tight. Switch off the light to see if it works. If something wrong happens change the bulb and repeat the steps again.

Wiring a light switch is not an easy task. First, you must purchase wires that are good in quality. Then you have to put the wire on the bulb and the switch. Test it if the electric wire works or not by attaching it to a power source.

Installing switch outlets is not that hard for you to do. Of course, you must first buy the proper equipments for the installation.

Wiring a receptacle is also an easy job to do. First, you should do grounding. Be sure to connect the device box ground screw and insulated ground wire together. The wires should be long enough so as to attach to the receptacle green screw. The black also known as "hot" wire is attached below the brass screw while the neutral wire or the white wire is attached below the plug silver screw.

There are different receptacles that cover your home so it depends upon what kind of receptacle is used. Then, the above steps would be applied.

Lastly wiring a doorbell would complete the five electrical tasks you can do yourself. Here we mean of the standard doorbell that is used. In order for us to repair, install, or replace a doorbell system we must understand its components first.

The power for the system comes from a voltage transformer that is usually installed on a light box in the basement or in the attic near the electrical panel. It is near for accessibility.

A transformer transforms one voltage from one value to another. It takes normal residential voltage of about 120, and transforms it down to a safer, lower voltage of usually 16 volts. This permits you to wire the system using low voltage wire of smaller gauge and rating.

Usually, the doorbell unit has two coils one at the back and the other one at the front door. It has movable cores that allow strikers to ring the chimes when a push button is activated.

Its system is wired by moving one side of the transformer to the common terminal of the doorbell unit then the other side by the push buttons at each door and then back to the one ring and two ring terminals in the unit. Mostly, the front door is two rings and the back door is one.

In the end, those who can do a lot of practical things at home will have a better edge against people who does not know simple things. You will not only save money but you add something important into your life.

Richard Dean F. Basa

On Off Light Switch by Tobias Wong $190 We've always loved Wong's practical-yet-unconventional design in the On Off Light Switch for Areaware, which was featured at the International Contemporary Furniture Fair in 2002. It's a fabulous example of Wong's ability to combine function with cleverness-the On Off Light Switch works wirelessly to control a light up to 100 feet away. It's also plated in a shiny chrome and encased in a Lucite box with a magnetic lid. The On Off Switch is a nice solution for those of us with quirky old houses that put light switches in the most inconvenient places, or for those of us who just want to be able to control the light wherever you're at! Areaware reinvents the everyday object with a more eccentric and absurdist twist, driven by a fascination about forward thinking technologies and original expression. A New York-based company, Areaware is dedicated to creating not just useful design accessories, but poetic objects that inspire an emotional response. The Areaware On Off Light Switch is available with the following: Included Features: Made of metal and lucite. Chrome finishWireless remoteDesigned by Tobias Wong.Shipping: In Stock items ship within 1 business day. Others usually ship within 2 weeks unless otherwise noted. Dimensions: Item: Width 4 In., Height 3.25 In., Length 6 In.

Switch $9.99 Switch;Switch; w/Cap; Fog Light;

TBSW05 Wall Switch by Tommy Bahama $38.5 The Tommy Bahama TBSW05 Wall Switch adds ease to the operation of compatible Tommy Bahama fans. The TBSW05 Wall Switch features 3 fan speeds and One-touch reverse option. Tommy Bahama Fan Company, headquartered in Saint Louis, Missouri, captures the essence of island living, allowing you to experience the trade winds at the flick of a switch. Rich materials of rattan and grass weaves, deep-stained woods and warm bamboo are combined with beautiful metal finishes to create an assortment of fans with unique materials and detailing. Bring island breezes into your home 365 days a year. The Tommy Bahama TBSW05 Wall Switch is available with the following: Included Features: 3 fan speeds.Independent uplight and downlight operation.Continuous light dimming.One-touch reverse.Decorator faceplate.Shipping: This item usually ships within 1-2 days.

Costanza Table with ON/OFF Switch Lamp by Luceplan $315 The Luceplan Costanza Table Lamp with ON/OFF Switch Lamp designed by Paolo Rizzatto, creates inviting light and injects rooms with vibrant color. The Costanza Table Lamp?with ON/OFF Switch Lamp features White polycarbonate shade, aluminum body and finish. Founded in 1978 by three Milanese architects, Luceplan's strategy is grounded in desing, respect for the environment, and quality. The Luceplan Costanza Table Lamp with ON/OFF Switch Lamp is available with the following: Included Features: One flared-shaped, White polycarbonate shade. Aluminum body with square base. Aluminum finish. On-off dimmer switch. UL Listed. Designed by Paolo Rizzatto.Lighting: One 100 Watt 120 Volt Type A-19 Medium Base Incandescent lamp (not included). Shipping: This item usually ships within two business days. Dimensions: Fixture: Height Adjustable from 30 In. to 43 In. Shade: Diameter 16 In. Base: Length 7 In., Width 7 In.

The Beach Remote Switch by Lights Up! $44 When evening falls, there's no need to get up from your patio chair to turn on the lights. The Lights Up! The Beach Remote Switch adapts The Beach Outdoor Floor Lamp for power control by remote. The included remote control turns the lamp on and off via the receiver on the power cord outlet adapter. Lights Up! is dedicated to creating "modern lighting for easy living." Based in Brooklyn, New York, Lights Up! has been developing affordable contemporary pendants, floor and table lamps, and sconces since 1987. Lights Up! features lighting designs by Rachel Simon and offers printed fabric shades by innovative modern textile designer Thomas Paul and UK designer Camilla Meijer. The Lights Up! The Beach Remote Switch is available with the following: Details:Remote controlPower cord outlet adapterFor use with The Beach Outdoor Floor LampUL ListedShipping: This item usually ships in 3 days.

Aqueous Wall Sconce with On/Off Switch by Access Lighting $97.2 Add a fluid lighting element to transitional interiors with the Access Lighting Aqueous Wall Sconce with On/Off Switch. It features a cylindrical Opal glass shade, which diffuses a warm flood of light beautifully offset by the cool Brushed Steel finish of the base. For ease of use, the Aqueous includes a convenient on/off switch on the wall plate. ADA compliant. Access Lighting, a California company, provides practical, beautiful, and affordable time-tested classics and energy efficient lighting. Exclusive designs in contemporary and traditional styles for indoors and outdoors are gathered from around the world. The Access Lighting Aqueous Wall Sconce with On/Off Switch is available with the following: Details:Cylindrical Opal glass shadeMetal baseBrushed Steel finishRectangular wall plateOn/off switch on wall plateADA CompliantETL ListedLighting: One 60 Watt 120 Volt Type E26 Medium Base Incandescent lamp (not included). Shipping: This item usually ships within 2 days. Dimensions: Fixture: Extension 4 In., Height 14.5 In., Width 4.3 In.

Design Pro LED Dimming Switch by Kichler $52.5 Read first! There are four steps to completing this Design Pro System; you have to configure-to-order this item. See below for details. The Kichler Design Pro LED Dimming Switch provides flexibility to join two fixtures, or it can be installed to supply leads directly and control the dimming effect of the system. Since 1938, Cleveland-based Kichler Lighting has created exceptional lighting in a variety of styles, finishes, colors and designs. With a diverse collection of indoor and outdoor lighting in classic and contemporary styles, Kichler Lighting always focuses on making home lighting that is both beautiful and functional. This Kichler Lighting Design Pro LED System requires additional steps for completion. Select and purchase additional needed parts from the list of related items below. To complete your Undercounter system, you need to select and purchase: Design Pro LED Light and/or Design Pro LED Disk Light, optional Dimming Switch or Nightlight, Interconnect Cables, and Power Supply. Please call customer service for any questions. This configure-to-order Design Pro System requires 4 steps for completion: (See below for more details.) Step 1. Select your choice of light fixture size and finish (Design Pro LED and/or Design Pro LED Disk), Disk Connector, optional Disc Wire Extension. Step 2. Select an optional Dimmer Switch or Nightlight. Step 3. Select quantity, size and finish of Interconnect Cables. Step 4. Select Power Supply. Step 1. DesignPro LED Light: From this page, select the desired size andfinish of Lights you would like by adding each new style to the shopping cart and continuing to add to the cart until the desired number of lamps has been chosen. This is also a good time to select any Design Pro LED Disk fixtures for your configuration. After choosing your lights, select an optional Dimmer or Nightlight. If you do not wish to choose one, proceed to Step 3: Interconnect Cables. This is Step 2. Optional Dimmer Switch and Nightlight: Choose an optional Dimming Switch or Nightlight for your system. Use a Dimming Switch to control the light level. Use a Nightlight when a low light level is desired. Next, select your Interconnect Cables. Step 3. Interconnect Cables: Click on the Interconnect Cables image from below. Select the quantity, size and finish of the Interconnect cables. For additional sizes, select item and add to cart one piece at a time. The Interconnect cables connect multiple fixtures together. Next step is choosing your power supply option. Step 4. Power Supply: From below, select your desired Power Supply link. Choices include: Under Cabinet Mounted Power Supply, Remote Control Power Supply (Design Pro Power Supply Lead needed with this option, options will appear on product page), or Plug-In Power Supply. The Kichler Lighting Design Pro LED Dimming Switch is available with the following: Details:Made of polycarbonate UL ListedOptions:Color: Black, or White (shown).Shipping: This item usually ships in

Warn ATV Light Switch $11.99 Warn ATV Light Switch

Beyond The Light Switch (DVD) $37.02 Beyond The Light Switch

Ariadni Incandescent Light Dimmer by Lutron $19 The Lutron Ariadni Incandescent Light Dimmer features a traditional toggle switch and smooth linear-style dimmer. The Ariadni Incan Dimmer accepts tradtional-style opening wall plates, such as the Lutron Fassada Wall Plate (sold separately). Lutron, located in Coopersburg, PA, is a comprehensive resource for lighting control solutions for residential and commercial applications. The Lutron Ariadni Incandescent Light Dimmer is available with the following: Included Features:Traditional toggle switch. Linear style dimmer. For incandescent lighting. Maximum capactiy 600 watts. Single-pole (one switch controls one light) wiring. Power failure memory.Options:Color: Ivory, Light Almond, or White (shown).Shipping: This item ships within 24 hours.

Maestro Incandescent Smart Light Dimmer by Lutron $41.5 The Maestro Incandescent Smart Light Dimmer by Lutron is where microprocessor technology meets a standard light switch. One quick tap to activate preset dimmer for you-decide light levels; two taps for full brightness, or one, long tap to set 10-second delayed off. LEDs indicate light level and glow softly as a locator light. Designed for incandescent fixtures, this smart dimmer can be used for single-pole wiring installation (for one light controlled by one switch) or three-way wiring installation for a light controlled from more than one switch. To dim and switch a light from multiple locations, use Maestro accessory dimmers (Call customer service for more information). Power failure memory. Lutron, located in Coopersburg, PA, is a comprehensive resource for lighting control solutions for residential and commercial application. The Maestro Incandescent Smart Light Dimmer by Lutron is designed to accept a designer-style (large opening), Claro Wall Plate by Lutron (sold separately) for a perfect color match. Maximum capacity 600 watts. The Maestro Incandescent Smart Light Dimmer by Lutron fits a standard junction box and is available with the following options: Color: White (shown), Light-almond, or Ivory Shipping: This item usually ships within 24 hours.

Cabinet of a light switch $19.99 D. Arky Cabinet of a light switch - Photographic Print

Skylark Incandescent Light Dimmer by Lutron $22.8 The Lutron Skylark Incandescent Light Dimmer is a designer-style, high-quality light dimmer for standard applications. The Skylark Incan Dimmer accepts the Lutron Claro Wall Plate (sold separately). Located in Coopersburg, PA, Lutron is a comprehensive resource for lighting control solutions for residential and commercial application. The Lutron Skylark Incandescent Light Dimmer is available with the following: Included Features: On/off switch.Slide dimmer. Maximum capacity of 600 watts. Single-pole (one switch controls one light) wiring for easy installation.Power failure memory.Options: Color: Ivory, Light Almond (shown), or White.Shipping: This item ships within 24 hours.

BE Light Task Lamp by QisDesign $590 The BE Light Task Lamp by QisDesign utilizes a clever hinge design to provide a task lighting solution that's at once adjustable and compact. This die-cast aluminum lamp can be folded completely flat or extended outward up to 135 degrees. The use of Light Guide Technology evenly diffuses the LED light. QisDesign successfully blends fluid organic shapes with advanced LED lighting technology. The resulting LED lamps and pendant lights have won numerous design awards, including the Red Dot, iF and Good Design awards. The BE Light Task Lamp by QisDesign is available with the following: Details:Made of die-cast aluminum alloySilver finishDimmer switch on baseExtends up to 135 degreesLED Color Temperature: 3000KETL ListedDesigned by QisDesignLighting: 12 Watt 120 Volt LED array (included). Shipping: This item usually ships within 3 business days. Dimensions: Fixture: Width 17.75 In., Height Adjustable from 13 In. to 18.38 In., Depth 4 In.

StarLed Light by Luceplan $234 Lead the way with light! Somewhat futuristic, the Luceplan StarLed Light allows you to take light wherever you go. Featuring the latest in LED technology, the StarLed Light features a prismatic, jewel-like head and cord-free mobility. It switches on and off at the recharging port and will stay on for about 4 hours before needing to be recharged. Founded in 1978 by three Milanese architects, Luceplan's strategy is grounded in design, respect for the environment, and quality. The Luceplan StarLed Light is available with the following: Details:Prismatic, jewel-like headMethacrylate columnSquare recharging portOn/off switch on recharging portTransformer3 Rechargeable AA NiMH (Nickel Metal Hydride) batteriesRechargeable batteries allow for about 4 hours of powerEnergy efficientUL ListedDesigned by Alberto Meda and Paolo Rizzatto, 2001Options:Diffuser/Finish: Green diffuser with Transparent finish, or Light Blue diffuser with Metal finish.Lighting: One 110 Volt White LED (included). Shipping: This item usually ships within two business days. Dimensions: Base: Depth 3 In., Width 3 In. Fixture: Height 12 In.

Ariadni Magnetic Low Voltage Light Dimmer by Lutron $40 The Ariadni Magnetic Low Voltage Light Dimmer by Lutron is for use with low-voltage lighting that uses a magnetic transformer. It features a traditional toggle switch and smooth linear-style dimmer for a traditional wallplate opening. Located in Coopersburg, PA, Lutron is a comprehensive resource for lighting control solutions for residential and commercial application. The Ariadni Magnetic Low Voltage Light Dimmer by Lutron is available with the following options: Color: Ivory, Light-almond, or White (shown) The Ariadni Magnetic Low Voltage Light Dimmer by Lutron uses standard single-pole wiring (one switch for one light) for easy installation. Maximum capacity is 450 Watts. Power-failure memory. Accepts the Lutron Fassada Wall Plate (sold separately). The Fassada Wall Plate is traditional in style (small opening), is a perfect color match to the dimmer, and shows no visible mounting hardware. Shipping: This item usually ships within 24 hours.

Sound Of Light Invisible Speaker $270 Now you can have your light and hear music, too, with the Sound Of Light Invisible Speaker. This speaker/light socket adds 4" of height however a shorter harp is included so that it can virtually disappear inside an existing lamp shade, and utilizes Texas Instruments Purepath wireless audio technology to transmit music from anywhere within 200 feet of the source. Controllable by remote and expandable with add-on speakers (sold separately). The Sound of Light lamp speaker was developed as the easy, innovative way to get surround sound--by converting standard floor and table lamps into a multi-zone wireless speaker system. The technology behind the Sound of Light wireless speakers/light sockets was made possible by partnering with Texas Instruments. The Sound Of Light Invisible Speaker is available with the following: Details:Made of metal2.4 GHz digital signal transmitter433 MHz receiver for handheld remote control operationOperating range of up to 200 ft.Expandable up to 4 speakersStereo RCA input jacksStereo 3.5mm mini input jackPairing push buttonExternal switching power supplySource audio input2 zone light on/off control, light on LED indicators and volume control2 zone mute function, mute LED indication and linked LED indicationAmplifier - 25Watt Texas Instruments Purepath Class DEach transmitter can operate up to 4 speaker lightsChannel selection: left-mono-right (selector switch)Treble control - knob to adjust treble to compensate for different lampshade densitiesLight control - lighting control relay (on/off)Works with iPods, iPhones, iPads, computers, TV and home stereosETL ListedPlease Note: The Sound of Light Invisible Speaker will increase the height of an existing socket and shade by approx. 4 inches. It comes with a harp size of 7 inches, which can be interchanged with other harp sizes as dictated by the lamp shade. Lighting: One 75 Watt 120 Volt Type A19 Medium Base Incandescent lamp (not included). Shipping: This item usually ships in 7 business days. Dimensions: Fixture: Height 11.5 In., Diameter 4.75 In.

LIM Task Light by Pablo $300 Designed by Pablo Pardo as an ultra-sleek, ultra-contemporary task light, the Pablo LIM Task Light literally puts Light In Motion. The removable L-shaped arm houses an array of high output LEDs and can be attached anywhere on its base via a magnet. Available in a black, white or brushed silver finish. Pablo, founded in 1993 by Venezuelan-born Pablo Pardo, designs and manufactures innovative lighting and home accessories characterized by uncompromising devotion to simplicity and utility. The Pablo LIM Task Light is available with the following: Details:Polycarbonate lensAluminum arm and base sleeve, steel insertLight arm placement and adjustment via a magnetic attachment systemHi/Low switch conveniently located into the lamp headDetachable plug adaptorDesigned by Pablo PardoEnergy-efficientETL ListedOptions:Finish: Black, Brushed Silver or White.Lighting: 3300K high output LED array with optical diffusing film (included), using only 7 Watts of energy with a 25,000 hour lifespan. Shipping: This item usually ships within three to five business days. Dimensions: Fixture: Height Adjustable from 12 In. to 16 In., Width 28 In. Base: Width 4 In. Arm: Length 24 In.

May Day Utility Light by Flos $129 A utility light fixture with ultra-modern flair. From the garage to the chic boutique, the Flos May Day Utility Light provides excellent directional and general ambient light. Made of injection-molded opaline polypropylene, its shade features a waterproof push button switch for instant on/off capabilities. The hooked handle also acts as a cord winder, made of 10% talc-filled injection-molded polypropylene. Designed by Konstantin Grcic. Flos was first established in 1962 in Merano, Italy, to produce high quality modern lighting. This Italian lighting company continues to do so to this day by collaborating with talented international designers and researching the latest lighting technologies and materials. Resulting Flos lighting fixtures are daring and provocative, yet uphold the fundamental principles of good design. The Flos May Day Utility Light includes the following: Details:Injection-molded Opaline polypropylene shadeInjection-molded polypropylene hook/handle/cord winder10' cord and plugWaterproof on/off push button switch on baseNot UL/ETL ListedMade in ItalyDesigned by Konstantin GrcicOptions: Colors: Black, or Orange.Lighting: One 60 Watt 120 Volt A19 Incandescent lamp (not included). Shipping: This item usually ships within 3-5 business days. Dimensions: Fixture: Height 20.1 In., Lower Diameter 8.4 In. Cord: Length 120 In.

Talak Wall Light by Artemide $690 The Artemide Talak Wall Light eases the accomplishment of reading and desk tasks by banishing shadows with crisp, clean illumination. The Talak Wall Light was designed by Neil Poulton in 2005 and features adjustable height, 180 degree rotation on a horizontal plane and energy-saving, mini-fluorescent lamping. Since 1959, Artemide has created a wide array of modern table lamps, floor lamps, wall sconces and suspensions. Technologically advanced, and with styles ranging from clean and refined to sculptural and avant garde, many Artemide designs--especially the Tolomeo and Tizio--have become icons of contemporary lighting design. The Artemide Talak Wall Light is available with the following: Details:Matte White thermoplastic shadePolished Chrome steel stemDie-cast aluminum wall bracketShade rotates 180 degrees and slides up or down stem for height adjustabilityPin-up kit suitable for direct wire or plug-in installationOn/off switch on shadeUL ListedMade in ItalyDesigned by Neil Poulton, 2005Lighting: One 13 Watt 120 Volt T2 Single Tube Axial Fluorescent lamp (included). Shipping: This item usually ships within 1 week. Dimensions: Fixture: Height Adjustable to 24.38 In. Wall Bracket: Depth 2.38 In. Shade: Height 1.06 In., Width 33.63 In.

Crystal Light by QisDesign $870 Its light moves from blue to red to green, with a myriad of other hues in between. The QisDesign Crystal Light contains eight crystal-shaped orbs, each of which has two multi-colored LEDs. But what makes the Crystal LEDs magical is what you see when the LEDs are off: a smooth, shiny silver surface that hides the colorful glow waiting within. QisDesign successfully blends fluid organic shapes with advanced LED lighting technology. The resulting LED lamps and pendant lights have won numerous design awards, including the Red Dot, iF and Good Design awards. The QisDesign Crystal Light is available with the following: Details:8 polycarbonate crystal-shaped lightsSilver (vacuum materialized) finish, visible when unlit Magnetic connectors (2 per crystal)On-off switch on miniature remote controlETL ListedIndoor use only recommendedDesigned by QisDesign2009 Red Dot award, 2010 iF China awardLighting: 2 RGB LEDs per crystal (included); 9 watts of power consumed. Shipping: This item usually ships within 3 business days. Dimensions: Crystal Unit: Height 2.88 In., Width 2.88 In.

Maestro Low Voltage Electronic Light Dimmer by Lutron $168 The Lutron Maestro Low Voltage Electronic Light Dimmer is where microprocessor technology meets a standard light switch in variable touch-control dimming activation. The Maestro Electronic Dimmer is designed to accept a designer-style (large opening) wall plate such as the Lutron Claro Wall Plate (sold separately). Lutron, located in Coopersburg, PA, is a comprehensive resource for lighting control solutions for residential and commercial application. The Lutron Maestro Low Voltage Electronic Light Dimmer is available with the following: Included Features: Variable dimming levels. 10-second delayed off function. LED light-level indicators. Maximum capacity 600 watts. For use with electronic transformers. Single-pole (one light) or three-way wiring. Power failure memory.Options: Color: Ivory, Light Almond, or White (shown).Shipping: This item ships within 24 hours.

Maestro Low Voltage Magnetic Light Dimmer by Lutron $95 The Lutron Maestro Low Voltage Magnetic Light Dimmer is where microprocessor technology meets a standard light switch in variable touch-control dimming activation. The Maestro is designed to accept a designer-style (large opening) wall plate such as the Lutron Claro Wall Plate (sold separately). Lutron, located in Coopersburg, PA, is a comprehensive resource for lighting control solutions for residential and commercial application. The Lutron Maestro Low Voltage Magnetic Light Dimmer is available with the following: Included Features: Variable dimming levels. 10-second delayed off function. LED light-level indicators. Maximum capacity 600 watts. For use with magnetic transformers. Single-pole (one light) or three-way wiring. Power failure memory.Options: Color: Ivory, Light Almond, or White (shown).Shipping: This item ships within 24 hours.

Skylark Low Voltage Magnetic Light Dimmer by Lutron $55 The Skylark Low Voltage Magnetic Light Dimmer, by Lutron, is a designer-style, high quality light dimmer for use with magnetic transformers. Preset, or slide to on/off. Uses standard, single-pole wiring (one switch controls one light) for easy installation. Power failure memory. Located in Coopersburg, PA, Lutron is a comprehensive resource for lighting control solutions for residential and commercial application. The Skylark Low Voltage Magnetic Light Dimmer, by Lutron, accepts the Claro Wall Plate, by Lutron. The wallplate features a designer (large) opening, a clean appearance with no visible screws and a perfect color match (sold seperately). To purchase the Claro Wall Plate, see below. The Skylark Low Voltage Magnetic Light Dimmer has a capacity of 450 watts and is available with the following options: Color: White, Light-almond (shown), or Ivory Shipping: This item usually ships within 24 hours.

Orbit Ceiling Fan with Optional Light by Monte Carlo $435.2 The Orbit Ceiling Fan by Monte Carlo Fan creates refreshing air movement and cheery illumination with two sources of light. The Monte Carlo Fan Company combines style, technology, and design to offer a diverse and comprehensive product line. The Orbit Ceiling Fan by Monte Carlo Fan is available with the following options: Body/Blade Finishes: Brushed Steel/Mahogany. Blade Diameter: 52 in. Control Option: Wall mount remote control system with 3 speeds, reverse switch, uplight/downlight lighting control, and dimmer control (included). Downrod: 6 in. (included). Lighting: Provides uplighting through an upper White glass diffuser (included) and diffused lighting through a lower round White glass diffuser (included). Upper light utilizes four 25 Watt 120 Volt Incandescent lamps (included). Lower light utilizes one 100 Watt 120 Volt Halogen lamps (included). No Light Option: Cap (shown) for no-light option (included). Reverse Switch: Located on wall mount remote control (included). Fan Speed RPMs: Low - 84, Medium - 128, High - 168 Lifetime warranty. UL Listed. Shipping: This item usually ships in 4-5 business days.

Sound Of Light Invisible Add-on Speaker $170 Create an invisible surround sound system with the Sound Of Light Invisible Add-on Speaker by retrofitting an existing lamp socket with this wireless speaker add-on. The speaker/light socket adds 4" of height however a shorter harp is included so that it can virtually disappear inside an existing lamp shade. You can operate up to three add-on speakers with the original Invisible Speaker system (sold separately), up to 200 feet from the source. The Sound of Light lamp speaker was developed as the easy, innovative way to get surround sound--by converting standard floor and table lamps into a multi-zone wireless speaker system. The technology behind the Sound of Light wireless speaker/light socket was made possible by partnering with Texas Instruments. The Sound Of Light Invisible Add-on Speaker is available with the following: Details: Made of metal 433 MHz receiver for handheld remote control operation Operating range of up to 200 ft. Stereo RCA input jacks Stereo 3.5mm mini input jack Pairing push button External switching power supply Source audio input 2 zone light on/off control, light on LED indicators and volume control 2 zone mute function, mute LED indication and linked LED indication Amplifier - 25Watt Texas Instruments Purepath Class D Channel selection: left-mono-right (selector switch) Treble control - knob to adjust treble to compensate for different lampshade densities Light control - lighting control relay (on/off) Works with iPods, iPhones, iPads, computers, TV and home stereos ETL ListedLighting: One 75 Watt 120 Volt Type A19 Medium Base Incandescent lamp (not included). Please Note: The Sound of Light Invisible Speaker will increase the height of an existing socket by approx. 4 inches. It comes with a harp size of 7 inches, which can be interchanged with other harp sizes as dictated by the lamp shade. Shipping: This item usually ships in 7 business days. Dimensions: Fixture: Height 11.5 In., Diameter 4.75 In.

Obi Floor Lamp by AXO Light $1959.2 The AXO Light Obi Floor Lamp combines delicate strips of silk with semi-reflective PVC chrome for a design samurai would envy. Its tripod base creates a sense of space and stability while allowing diffused light to bounce and play off its polished surface. On/off pull chain features Japanese detailing. A high quality piece for contemporary living spaces. Italy's AXO Light combines traditional Venetian glasswork and artisan craftwork with avant-garde lighting techniques and innovative materials. Their design philosophy is clear: use creativity and inspiration to create stunning lighting replete with value and emotion. The AXO Light Obi Floor Lamp is available with the following: Details:Silken ribbons shadeMetal fittingsChrome finishOn/off pull switch with Japanese detailingDesigned by Manuel VivianETL ListedOptions:Shade: Black, Ivory, Tobacco, or White.Lighting: Three 100 Watt 120 Volt Type E26 Incandescent lamps (not included), or three 20 Watt 120 Volt Type E26 Fluorescent lamps (not included). Shipping: This item usually ships within 2 to 4 weeks. Dimensions: Fixture: Height 69.63 In., Overall Diameter 24.75 In. Shade: Height 16.88 In. Base: Overall Diameter 22.5 In.

MagLite 108000567 Switch Assembly for C Light $19.93 Switch Assembly for C Light

Design Pro LED Night Light by Kichler $52.5 Read first! There are four steps to completing this Design Pro System; you have to configure-to-order this item. See below for details. The Kichler Design Pro LED Night Light is one part of this system. Since 1938, Cleveland-based Kichler Lighting has created exceptional lighting in a variety of styles, finishes, colors and designs. With a diverse collection of indoor and outdoor lighting in classic and contemporary styles, Kichler Lighting always focuses on making home lighting that is both beautiful and functional. This system requires additional steps for completion. Select and purchase additional needed parts from the list of related itemsbelow. To complete your Undercounter system, you need to select and purchase: Design Pro LED Light and/or Design Pro LED Disk Light, optional Dimming Switch or Night Light, Interconnect Cables, and Power Supply. Please call customer service for any questions. This configure-to-order Design Pro System requires 4 steps for completion: (See below for more details.) Step 1. Select your choice of light fixture size and finish (Design Pro LED and/or Design Pro LED Disk), Disk Connector, optional Disc Wire Extension. Step 2. Select an optional Dimmer Switch or Night Light. Step 3. Select quantity, size and finish of Interconnect Cables. Step 4. Select Power Supply. Step 1. DesignPro LED Light: From this page, select the desired size andfinish of Lights you would like by adding each new style to the shopping cart and continuing to add to the cart until the desired number of lamps has been chosen. This is also a good time to select any Design Pro LED Disk fixtures for your configuration. After choosing your lights, select an optional Dimmer or Night Light. If you do not wish to choose one, proceed to Step 3: Interconnect Cables. This is Step 2. Optional Dimmer Switch and Nightlight: Choose an optional Dimming Switch or Night Light for your system. Use a Dimming Switch to control the light level. Use a Night Light when a low light level is desired. Next, select your Interconnect Cables. Step 3. Interconnect Cables: Click on the Interconnect Cables image from below. Select the quantity, size, and finish of Interconnect cables. For additional different sizes, select item and add to cart one piece at a time. The Internet cables connect multiple fixtures together. Next step is choosing your power supply option. Step 4. Power Supply: From below, select your desired Power Supply link. Choice includes: Under Cabinet Mounted Power Supply, Remote Control Power Supply (Design Pro Power Supply Lead needed with this option; options will appear on product page), or Plug-In Power Supply. The Kichler Design Pro LED Night Light is available with the following: Details:Made of polycarbonate Can be installed directly to the supply lead or placed between any two fixturesUL ListedETL ListedOptions:Color: Black (shown), or White.Shipping: This item usually ships in 3-5 days. Dimensions: Item: Height .5 In., Width 3.5 In.,

Talak LED Wall Light by Artemide $875 A supremely functional light, the Artemide Talak LED Wall Light is adjustable in height as well as rotation. Simply move lamp up or down and 180 degrees side to side for the perfect lighting. Features thermoplastic in a Matte White powder coated finish. Since 1959, Artemide has created a wide array of modern table lamps, floor lamps, wall sconces and suspensions. Technologically advanced, and with styles ranging from clean and refined to sculptural and avant garde, many Artemide designs--especially the Tolomeo and Tizio--have become icons of contemporary lighting design. The Artemide Talak LED Wall Light is available with the following: Details:Thermoplastic shadeMatte White powder coated finishPolished Chrome steel stemWall bracket in die-cast aluminum suitable for mounting to solid wall surfaceShade rotates 180 degree on the horizontal planeHeight adjustable by sliding up and down stemOn/off dimmer switch on shadeLED driver on cordPlug-in or direct wire installationUL ListedMade in ItalyDesigned by Neil PoultonLighting: 80 LED array utilizing 8 Watts total (included). Shipping: This item usually ships within 1 week. Dimensions: Wall Bracket: Height 2.38 In., Width 2.38 In. Fixture: Height Adjustable to 24.25 In., Extension 33.5 In.

Obi Table Lamp by AXO Light $1658.4 A sash traditionally worn with Japanese kimonos, the obi is reinterpreted for the contemporary AXO Light Obi Table Lamp. Designed by Manuel Vivian, the shade is composed of numerous ribbons of silk. Available in tobacco or white silk with a white liner or in ivory or black silk with a chrome-plated liner, which perfectly complements the chrome-plated tripod frame. Italy's AXO Light combines traditional Venetian glasswork and artisan craftwork with avant-garde lighting techniques and innovative materials. Their design philosophy is clear: use creativity and inspiration to create stunning lighting replete with value and emotion. The AXO Light Obi Table Lamp is available with the following: Details:Silken ribbons shadeOn/off pull switch with Japanese detailingMetal frameChrome finishDesigned by Manuel VivianETL ListedOptions:Shade: Black, Ivory, Tobacco, or White.Lighting: Three 60 Watt 120 Volt Type E26 Incandescent lamps (not included), or three 10 Watt 120 Volt Type E26 Fluorescent lamps (not included). Shipping: This item usually ships within 2 to 4 weeks. Dimensions: Fixture: Overall Diameter 16.88 In., Height 32.63 In. Base: Overall Diameter 16.88 In. Shade: Height 11.75 In.

D'E-Light Table Lamp by Flos $395 Truly delightful style and versatility for the modern desktop. The Flos D'E-Light Table Lamp features crisp lines and a chrome finish that glistens in the light of energy efficient LEDs. Its head also doubles as a docking station for your iPhone, iPod or iPad, with an aluminum panel extending outward to hold the device in place. Designed by Philippe Starck. Flos was first established in 1962 in Merano, Italy, to produce high quality modern lighting. This Italian lighting company continues to do so to this day by collaborating with talented international designers and researching the latest lighting technologies and materials. Resulting Flos lighting fixtures are daring and provocative, yet uphold the fundamental principles of good design. The Flos D'E-Light Table Lamp is available with the following: Details:Aluminum headExtruded aluminum stemZamak baseChrome-plated finishOptical on/off switch with Soft Touch technology and 2-step dimmerCharging dock for iPod, iPhone and iPadLED Color Temperature 2700KCRI: 90336 lumensUL ListedDesigned by Philippe Starck, 2011Lighting: 5 Watt 120 Volt LED array (included). Shipping: This item usually ships within five business days. Dimensions: Base: Width 4.72 In. Fixture: Height 12.48 In., Width 8.5 In.

Kioto Floor Lamp by OTY Light $1934.62 The OTY Light Kioto Floor Lamp enhances room ambience with clear illumination in a crisp and sophisticated design. The Kioto Floor Lamp features hand-blown clear crystal wrapped with strands of glass. OTY Light, offered in the US by Illuminating Experiences, designs and manufactures distinctive Italian contemporary lighting using hand-blown Murano glass techniques. The OTY Light Kioto Floor Lamp is available with the following: Included Features:One hand-blown Clear crystal shade with glass strands.Polished Chrome finish. Clear cord.Dimmer switch on cord.Designed by Paolo Crepax and Silvio Zanon. Lighting: One 150 Watt 120 Volt E26 A19 Clear Incandescent lamp (not included) or one 150 Watt 120 Volt T10 Clear Halogen lamp (not included). Please Note: The glass shade on this item is hand-blown. As a result, small blemishes, bubbles, and slight variations in the color of the glass are normal and a desired result. Shipping: This item usually ships within 1-2 weeks. Dimensions: Diffuser: Diameter 11.75 In. Fixture: Height 19 In., Overall Height 70 In. Base: Diameter 13 In.

Kioto Table Lamp by OTY Light $1561.31 The OTY Light Kioto Table Lamp creates a layer of crisp and dramatic accent lighting in a design that showcases artistic finesse. The Kioto Table Lamp features hand-blown clear crystal wrapped with strands of glass. OTY Light, offered in the US by Illuminating Experiences, designs and manufactures distinctive Italian contemporary lighting using hand-blown Murano glass techniques. The OTY Light Kioto Table Lamp is available with the following: Included Features:One hand-blown Clear crystal shade with glass strands.Polished Chrome finish.Clear cord.On/Off switch on cord.Designed by Paolo Crepax and Silvio Zanon. Lighting: One 150 Watt 120 Volt E26 A19 Incandescent lamp (not included) or one 150 Watt 120 Volt T10 Clear Halogen lamp (not included). Please Note: The glass shade on this item is hand-blown. As a result, small blemishes, bubbles, and slight variations in the color of the glass are normal and a desired result. Shipping: This item usually ships within 3 to 5 business days. Dimensions: Diffuser: Diameter 11.75 In., Height 19 In. Fixture: Overall Height 21.87 In. Base: Diameter 8.75 In.

24187-20 Light Switch Internal $28.5 Fire Magic Light Switch-Internal for Echelon 1060790 and 660 Grills